Asus AAM60BI Quick Setup Instructions Manual - Page 25

Browse online or download pdf Quick Setup Instructions Manual for Network Router Asus AAM60BI. Asus AAM60BI 30 pages. Asus aam60ev; aam60bi; aam60vi adsl routers

Print Page

To remove all Groups from the channel. As before, the new configuration will work immediately but NOT be remembered

after a router restart unless you do a SAVE (see below).

SAVE

To write the current settings of all channels to flash memory. All new settings are now available after the ADSL router

restarts.

Notes - ADD, DELETE and FLUSH are per channel actions.

To go to Groups Sub-menu

<RULES>

To go to Rules Sub-menu

List of IP-Filter Active Channels

It display the current status of the active channels

No:

channel number with IP Filter enable

Interface:

ppp_device (e.g. PPPoA or PPPoE)

(e.g. MpoA or IpoA)

Groups:

selected groups in this channel

A group is the policy to deny or allow a certain packets, which are defined in rules. Each group is independent, and they

may refer to a single rule or a set of rules (max. 127). Users may define up to 16 different groups in a router.

Group No

The number of the Group to be defined.

Rules

The rules to be ADDed or DELETEd in the Group. Users can type one or more rules or a range of rules. For example, "0-

2,4-5" means all Rules 0, 1, 2, 4, and 5 are included.

ADD

To add one or more pre-defined Rules in the Group. It will have effect after this action, but, the new setting will disappear

after ADSL router restarts (see SAVE below).

DELETE

To remove one or more Rules from the Group. It will have effect after this action, but, the new setting will disappear after

ADSL router restarts.

FLUSH

To remove all Rules in the Group. It will have effect after this action, but, the new setting will disappear after ADSL router

restarts.

SAVE

To write the current setting of the channel to flash memory. The new settings are now stored and available after ADSL

router restarts.

Notes - ADD, DELETE and FLUSH are per group actions.

POLICY

This simply means do you want the action of this rule to deny access or allow access.

<RULES>

To go to Rules Sub-menu

<HOME>

To return IP Filter Configuration Menu

- 25 -