Doughpro DP2000ICEC Operation Manual - Page 4

Browse online or download pdf Operation Manual for Power Tool Doughpro DP2000ICEC. Doughpro DP2000ICEC 18 pages. Dual heat tortilla press

Print Page

WARNING

In case of power cord damage,

do not attempt to repair or

replace the power cord. Contact

the manufacturer or the local

distributor.

WARNING

Avoid touching hot surfaces

while operating the machine.

CAUTION

During normal operation, the

base of the machine must be

installed or placed above the wall

socket.

CAUTION

When servicing or cleaning the

machine, make sure that the

power cord is removed from the

wall socket.

Control Board Operations

Solid State Controller

This controller has three (3) control

features:

1. Temperature – Temperature may

be set from 225°-450°F (107°-

232°C). The factory default

setting is 200°. If you would like

to change this setting, simply

follow the Controller Operation

directions.

2. Counter – Cycle counter counts

the number of applications from

1 to

9999

Counter).

3. Timer – A timer mode is

available upon special request. If

you would like to have the timer

function installed, please call

1-800-624-6717

Controller Operation

Temperature Control

1. Press the MODE button until

temperature is displayed.

2. Push and hold SET button and

simultaneously push UP ( ) or

DOWN ( ) arrow buttons to the

desired temperature setting.

For the DP2000, both the upper

and lower platens may be set to

different temperatures.

• Upper Platen: Simply

push the MODE button

until the "upper" light is

illuminated. Adjust the

temperature as noted

above.

• Lower platen: Simply

push the MODE button

until the "lower" light is

illuminated. Adjust the

temperature as noted

above.

-3-

(see additional Notes –

DP2000-1725-7/04