Electric Eel Ecam Ace Operator's Manual - Page 6

Browse online or download pdf Operator's Manual for Analytical Instruments Electric Eel Ecam Ace. Electric Eel Ecam Ace 16 pages. Color video inspection system
Also for Electric Eel Ecam Ace: Operation Manual (4 pages)

Print Page

USER INSTRUCTIONS

Setting Up the eCam Ace for Use

Connect DC power plug to the jack on the reel hub, then

plug the AC power plug into the outlet. Press the power but-

ton on the monitor. At this point you should have lights on

the camera and a picture on the monitor. You are now ready

to perform the inspection procedure.

Alternatively, you may wish to use 18V Milwaukee compat-

ible batteries for ultimate portability. Standard 3.0Ah bat-

teries should allow the user to run for 4-6 hours in a single

charge. Batteries are sold separately.

Locating Sonde

With the eCam Ace the 512hz locating sonde is always on.

Use any brand of 512hz locator to find the sonde when un-

derground. Sondes are locatable up to 15ft. underground

dependent upon thickness of concrete and presence of steel/

cast iron pipe.

Video Output Jack

A video output jack is located on the lower lip of the LCD

monitor. This may be used to supply video to an external

monitor or recording device.