Asus RT-N11 User Manual - Page 7

Browse online or download pdf User Manual for Network Router Asus RT-N11. Asus RT-N11 47 pages. Ez wireless n router

Print Page

3. Getting Started

The default settings of the wireless router may need change so as to meet your individual needs.

Therefore, before using the ASUS Wireless Router, check the basic settings to make sure they all

work in your environment.

Note:

setup problems due to wireless uncertainty.

ired Connection

The ASUS RT-N11 Wireless Router is supplied with an Ethernet cable in the package. Since

the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use either

straight-through or crossover cable for wired connection. Plug one end of the cable to the LAN

port on the rear panel of the router and the other end to the Ethernet port on your PC.

For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer

to your wireless adapter user manual for wireless connection procedures. By default, the

SSID of ASUS Wireless Router is "default" (in lower case), encryption is disabled and open

system authentication is used.

To access RT-N11 Wireless Router, you must have correct TCP/IP settings on your wired or

wireless clients. Set the IP addresses of the clients within the same subnet of RT-N11.

Getting IP address Automatically

The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your

PC get IP address automatically from the ASUS Wirelesss Router.

Note: Before rebooting your PC, switch ON the

wireless router and make sure the router is in ready

state.

Setting up IP address Manually

To set IP address manually, you need to know the default

settings of the ASUS Wireless Router:

• IP address 192.168.1.1

• Subnet Mask 255.255.255.0

e3188_WL520GU_GC_Manual.indd 7

RT-N11 EZ Wireless N Router User Manual

Refer

5/22/08 2:50:21 PM