Baumer HMG 10-B-Profibus DP Installation And Operating Instructions Manual - Page 4

Browse online or download pdf Installation And Operating Instructions Manual for Media Converter Baumer HMG 10-B-Profibus DP. Baumer HMG 10-B-Profibus DP 32 pages. Absolute encoder with magnetic sensing

Print Page

IMPORTANT NOTES

1.1

Symbol guide

Warning

Disregarding could result in serious injury, death or damage to property

)

Attention

Disregarding could result in damage to property or damage/malfunction of the en-

coder

Information

Additional information and recommendations

1.2

Intended use

The encoder is a precision measurement device for the acquisition of speed/position in-

formation for the control of drive units and the provision of electronic output signals for

downstream devices.

The encoder must not be used for any other purpose. The function of the encoder is de-

scribed in this mouting instruction. The customer must check the suitability for the purpose

intended.

Mounting and selection must be executed by authorized and qualified personnel. Moun-

ting, electrical commissioning or any other work with the encoder or system is to be perfor-

med by appropriately qualified staff only.

Do not put encoder into service if there is any visible evidence of damage.

Do not operate encoder beyond the limit values stated in this mounting instruction.

Any risk of personal injury, damage of the system or company equipment due to failure or

malfunction of the encoder must be eliminated by corresponding safety measures.

Warning

Disregarding intended use could result in serious injury or damage to property.

1.3

Exclusion from liability

The manufacturer is not liable for any damage to persons or property resulting from unin-

tended use of the encoder.

1/29

MB246EN - 11171695, 17A2, Baumer_HMG10-ProfibusDP_II_EN