Baumer HOG 10 G Installation And Operating Instructions Manual - Page 15

Browse online or download pdf Installation And Operating Instructions Manual for Media Converter Baumer HOG 10 G. Baumer HOG 10 G 36 pages. Incremental encoder (twin encoder)
Also for Baumer HOG 10 G: Mounting And Operating Instructions (40 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (36 pages)

Print Page

5.4

Schritt 3 - Version mit Konuswelle

Motorwelle einfetten!

Die Antriebswelle sollte einen mög-

lichst kleinen Rundlauffehler aufwei-

sen, da dieser zu einem Winkelfehler

führen kann (siehe Abschnitt 5.8).

Außerdem verursachen Rundlauffeh-

ler Vibrationen, die die Lebensdauer

des Drehgebers verkürzen können.

MB045T1 - 11145663

Baumer_HOG10-HOG10G-CANNON-T1_II_DE-EN (16A4)

5.4

Zentrierbohrung

Center hole

DIN 332-D, M6x16 mm

1:10

Lubricate motor shaft!

The drive shaft should have as less

runout as possible because this can

otherwise result in an angle error

(see section 5.8). In addition, any ra-

dial deviation can cause vibrations,

which can shorten the lifetime of the

encoder.

Montage / Mounting

