Baumer HOG 10 G Mounting And Operating Instructions - Page 17

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HOG 10 G. Baumer HOG 10 G 36 pages. Incremental encoder (twin encoder)
Also for Baumer HOG 10 G: Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (40 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages)

Print Page
Baumer HOG 10 G Mounting And Operating Instructions
5.4

Schritt 3 - Konuswelle

Antriebswelle einfetten.
Die Antriebswelle sollte einen
möglichst kleinen Rundlauffehler
aufweisen, da dieser zu einem
Winkelfehler führen kann, siehe
Abschnitt 5.7.
Rundlauffehler verursachen Vibrati-
onen, die die Lebensdauer des
Gerätes verkürzen können.
MB136T1 - 11145664
Baumer_HOG10-HOG10G-Harting_T1_DE_EN_202011_MI_11145664 (20A2)
5.4

Step 3 - Cone shaft

Zentrierbohrung
Center hole
DIN 332-D, M6x16 mm
1:10
Lubricate drive shaft.
The drive shaft should have as less
runout as possible because this can
otherwise result in an angle error, see
section 5.7.
Runouts can cause vibrations, which
can shorten the service life of the
device.
Montage / Mounting
5
14