Baumer Hubner Berlin HMG 11 Installation And Operating Instructions Manual - Page 38
Browse online or download pdf Installation And Operating Instructions Manual for Media Converter Baumer Hubner Berlin HMG 11. Baumer Hubner Berlin HMG 11 48 pages. Absolute encoder ethercat
Also for Baumer Hubner Berlin HMG 11: Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (36 pages)
Print Page
7
Elektrischer Anschluss / Electrical connection
7.5
Hinweis für Ex-Schutz
Vor
der
Klemmenkastendeckel(s) prüfen, ob
die
Klemmenkastendeckeldichtung
unbeschädigt ist.
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Motorkabeln ver-
legt werden.
Kabelabschluss:
1 ... 3 kΩ
Blau/Blue =
Weiß/White = K1 (A+)
Braun/Brown = K1 (A-)
Grün/Green = K2 (B+)
Gelb/Yellow = K2 (B-)
Grau/Grey = Clock (Clock+)
Rosa/Pink = Clock (Clock-)
Schwarz/Black = Data (Data+)
Violett/Violet = Data (Data-)
35
Montage
des/der
Rot/Red = +UB
GND
7.5
Advice for Ex approval
Check that the seal of the terminal
box(es) is not damaged before moun-
ting the terminal box(es).
7.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
1 ... 3 kΩ
Baumer_HMG11-A-T1_II_DE-EN (17A2)
Aderendhülsen benutzen
Use core-end ferrules
Kabelschirm
Cable shield
MB097aT1 - 11064773