Baumer HUBNER BERLIN HMG10 Mounting And Operating Instructions - Page 7

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN HMG10. Baumer HUBNER BERLIN HMG10 32 pages. Absolute encoder profinet with magnetic sensing
Also for Baumer HUBNER BERLIN HMG10: Mounting And Operating Instructions (40 pages)

Print Page

2.2

Attention instructions for mounting and operation

)

Risk of destruction due to electrostatic charge

Electronic parts contained in the device are sensitive to high voltages�

» Do not touch plug contacts or electronic components�

» Protect output terminals against external voltages�

» Do not exceed maximum voltage supply�

)

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces�

» Never restrict the freedom of movement of the device� The mounting instructions

must be followed�

» It is essential that the specified clearances and/or angles are observed.

)

Risk of destruction due to mechanical shock

Violent shocks, e� g� due to hammer impacts, can lead to the destruction of the

sensing system�

» Never use force� Mounting is simple when correct procedure is followed�

» Use suitable puller for dismounting�

)

Risk of destruction due to contamination

Dirt penetrating inside the device can cause short circuits and damage the sensing

system�

» Absolute cleanliness must be maintained when carrying out any work on the

device�

» Never allow lubricants to penetrate the device�

)

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the sensing system and the ball bearings. Dismounting

a device, secured to a shaft by adhesive may lead to the destruction of the device�

» Do not use adhesive fluids for fixing.

MB248EN - 11171699, 19A2, Baumer_HMG10-PROFINET_II_EN

SAFETy AND ATTENTION INSTRUCTIONS

4/27