Baumer HUBNER BERLIN HOG 10 Mounting And Operating Instructions - Page 14

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 pages. Incremental encoder with connecting cable ölfle
Also for Baumer HUBNER BERLIN HOG 10: Installation And Operating Instructions Manual (36 pages), Installation And Operating Instructions Manual (40 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (28 pages)

Print Page
Baumer HUBNER BERLIN HOG 10 Mounting And Operating Instructions
4
Montage / Mounting
4.4

Schritt 3 - Konuswelle

Antriebswelle einfetten!
Die Antriebswelle sollte einen mög-
lichst kleinen Rundlauffehler aufwei-
sen, da dieser zu einem Winkelfehler
führen kann, siehe Abschnitt 4.7.
Rundlauffehler verursachen Vibratio-
nen, die die Lebensdauer des Gerätes
verkürzen können.
11
4.4

Step 3 - Cone shaft

1:10
Lubricate drive shaft!
The drive shaft should have as less
runout as possible because this can
otherwise result in an angle error, see
section 4.7.
Runouts can cause vibrations, which
can shorten the service life of the
device.
Baumer_HOG10-FSL-T2_II_DE-EN (17A2)
Zentrierbohrung
Center hole
DIN 332-D, M6x16 mm
MB071.1T2 - 11069399