Baumer HUBNER BERLIN HOG 10 Mounting And Operating Instructions - Page 30

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 pages. Incremental encoder with connecting cable ölfle
Also for Baumer HUBNER BERLIN HOG 10: Installation And Operating Instructions Manual (36 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (28 pages)

Print Page
Baumer HUBNER BERLIN HOG 10 Mounting And Operating Instructions
7
Elektrischer Anschluss / Electrical connection
7.4
Option EMS (Enhanced Monitoring
System): Status LED / Fehlerausgang
Rotblinkend
Signalfolge-, Nullimpuls- oder
9)
Impulszahlfehler (Fehlerausgang =
HIGH-LOW-Wechsel)
Rot
Ausgangstreiber überlastet
(Fehlerausgang = LOW)
Aus
Versorgungsspannung falsch
bzw. nicht angeschlossen
(Fehlerausgang = LOW)
Grünblinkend
Gerät o.k., drehend
(Fehlerausgang = HIGH)
Grün
Gerät o.k., Stillstand
(Fehlerausgang = HIGH)
Nur bei drehendem Gerät
9)
Only at rotating device
9)
27
500 ms
EMS
Monitoring
System
Blockschaltbild / Block diagram
Baumer_HOG11-HOG11G-T2_II_DE-EN (17A2)
7.4
Option EMS (Enhanced Monitoring
System): Status LED / Error output
Flash light red
9)
HIGH (5...30 V)
LOW (0 V)
Red
No light
HIGH (5...30 V)
LOW (0 V)
Flash light green Device o.k., rotating
Green
HIGH (5...30 V)
LOW (0 V)
Err
Power
5...30 V
driver
0 V
Error of signal sequence, zero
pulse or pulses (Error output =
HIGH-LOW change)
Overload output transistors
(Error output = LOW)
No voltage supply connection
or wrong connection
(Error output = LOW)
(Error output = HIGH)
Device o.k., stopped
(Error output = HIGH)
MB072T2 - 11070661