Baumer Hubner Berlin microGen PMG10 Operating Manual - Page 13

Browse online or download pdf Operating Manual for Media Converter Baumer Hubner Berlin microGen PMG10. Baumer Hubner Berlin microGen PMG10 40 pages. Absolute encoder
Also for Baumer Hubner Berlin microGen PMG10: Operating Manual (44 pages), Operating Manual (40 pages)

Print Page
Baumer Hübner
Ill. 4: Installing encoder, mounting device and coupling
1
Drive shaft
3
Attachment device (customized)
Tools
2.5 mm
n
n
Instruction:
a) Prior to installation, check the drive runout error and dimensions.
b) Mount the encoder in a way ensuring the electrical connection is protected against direct
water ingress.
c) Apply grease onto the drive shaft.
d) Mount the attachment device (customer-specific) to the drive using the fastening screws.
e) Push coupling onto the encoder shaft and tighten to the specified torque.
K35 permitted tightening torque:
Mt = 1 ±10 % Nm (plastic side)
Mt = 1.3 ±10 % Nm (metal side)
f) Mount the encoder using suitable screws, e.g. M6x16 mm (ISO 4017) onto the B10 flange of
drive or attachment device (customer-specific).
g) Fasten the coupling on the drive shaft.
K35 Permitted tightening torque:
Mt = 1 ±10 % Nm (plastic side)
Mt = 1.3 ±10 % Nm (metal side)
Observe the remarks in the data sheet and the coupling assembly instructions.
V1 | PMG10 & PMG10P EtherNet/IP
1
2
10 mm
3
4
2
Mounting screw M6x16 mm for attach-
ment device (ISO 4017)
4
Coupling
Operating Manual
Installation
|
5
13