Baumer HUBNER BERLIN PROFI NET microGen HMG10P Mounting And Operating Instructions - Page 12
Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN PROFI NET microGen HMG10P. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 32 pages. Incremental encoder with magnetic sensing
Also for Baumer HUBNER BERLIN PROFI NET microGen HMG10P: Mounting And Operating Instructions (40 pages), Operating Manual (44 pages)
Print Page
MOUNTING / MOUNTING TO DRIVE SHAFT
4.3.2
Cone shaft
)
Service life restrictions and angle error by runouts
High runout of the drive shaft can cause device angle error, see
page
High runout of the drive shaft can cause vibrations, which can shorten the ser-
vice life of the device�
» Lubricate drive shaft!
» M inimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The device must be mounted with cable connection facing downward and not
exposed to water�
9/27
12�
5
10b
10c
10a
10e
10d
10c 10b
10b
9
10c
1�6x8 mm
MB248EN - 11171699, 19A2, Baumer_HMG10-PROFINET_II_EN
17 mm
7a
11b
11a
Mt = 3���4 Nm
10 mm
section 4.5,
TX 20
2
3
5 mm