Baumer HUBNER BERLIN PROFI NET microGen HMG10P Mounting And Operating Instructions - Page 19
Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN PROFI NET microGen HMG10P. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 32 pages. Incremental encoder with magnetic sensing
Also for Baumer HUBNER BERLIN PROFI NET microGen HMG10P: Mounting And Operating Instructions (40 pages), Operating Manual (44 pages)
Print Page
5.2.2.2
Trigger level
Trigger level:
High / Low:
Transmission length:
Output frequency
Trigger level:
High / Low:
Transmission length:
Output frequency
)
5.2.3
Programming interface (only HMG10P)
Via connection SA and SB, encoder parameters such as additional output, switch-off
and switch-on speeds can be changed and read out� With the Z-PA�SDL�1 WLAN
adapter, available as accessory, see
web browser�
5.2.4
LED function displays
LED
INC1
INC2
(additional output
incremental)
Status
Speed
MB248EN - 11171699, 19A2, Baumer_HMG10-PROFINET_II_EN
Electrically isolated: The TTL/HTL (Vin = Vout) output at the additional
output incremental is electrically isolated and requires a separate power
supply�
Red
Without function
Undervoltage
Overload
Over-temperature
Internal error
Speed higher switching speed Speed lower switching speed
(overspeed)
ELECTRICAL CONNECTION / TERMINAL BOX [B]
TTL/RS422
≥2.5 V / ≤0.5 V
≤550 m @ 100 kHz
≤600 kHz
TTL/HTL (Vin = Vout)
≥2.5 V / ≤0.5 V (TTL)
≤550 m @ 100 kHz (TTL)
ǀ
≤600 kHz (TTL)
≤350 kHz (HTL)
section
5.3, the encoder can be accessed via a
ǀ
≥Ub -3 V / ≤1.5 V (HTL)
ǀ
≤350 m @ 100 kHz (HTL)
Green
Without function
OK
OK
16/27