Baumer HUBNER BERLIN PROFI NET microGen HMG10P Mounting And Operating Instructions - Page 20
Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN PROFI NET microGen HMG10P. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 40 pages. Incremental encoder with magnetic sensing
Also for Baumer HUBNER BERLIN PROFI NET microGen HMG10P: Mounting And Operating Instructions (32 pages), Operating Manual (44 pages)
Print Page
ELECTRICAL CONNECTION / TRIGGER LEVEL
5.3
Trigger level
Trigger level:
High / Low:
Transmission length:
Output frequency
5.4
Programming interface (only HMG10P)
Via connection SA and SB, encoder parameters such as the number of pulses for the in-
cremental outputs 1 and 2 and/or the switch-off and switch-on speeds can be changed and
read out� With the Z-PA�SDL�1 WLAN adapter, available as accessory, see
encoder can be accessed via a web browser�
5.5
LED function displays
LED
INC1 (incremental
output 1)
INC2 (incremental
output 2)
Status
Speed
20/40
TTL/HTL (Vin = Vout)
≥2.5 V / ≤0.5 V (TTL)
≥Ub -3 V / ≤1.5 V (HTL)
≤550 m at 100 kHz (TTL)
≤350 m at 100 kHz (HTL)
≤600 kHz (TTL)
≤350 kHz (HTL)
red
Undervoltage, overload,
over-temperature
Undervoltage, overload,
over-temperature
Internal error
Speed higher
switching speed (overspeed)
MB258EN - 11196411, 21A1, Baumer_HMG10-Inc_EN_202103_MI_11196411
section
6.1, the
green
OK
OK
OK
Speed lower
switching speed