Asus 4G-N12 Quick Start Manual - Page 13

Browse online or download pdf Quick Start Manual for Wireless Router Asus 4G-N12. Asus 4G-N12 50 pages. Mobile broadband wireless lte router

Print Page

• DHCP server has been disabled:

• Launch the web GUI. Go to General > Network Map > Clients and search for the

device that you want to connect to the router.

• If you cannot find the device in the Network Map, go to Advanced Settings >

LAN, select Yes on the Enable the DHCP Server.

• Cannot find the SSID:

• If you are using a wireless LAN adapter, check if the wireless channel in use

conforms to the channels available in your country/area. You can adjust the

channel, channel bandwidth, and wireless mode available in your country/area.

•

If you still cannot connect to the router wirelessly, you can reset your router to

factory default settings. In the router GUI, click Administration > Restore/Save/

Upload Setting and click Restore.

Internet is not accessible.

• Check if your router can connect to your ISP's WAN IP address. To do this,

launch the web GUI and go to General> Network Map, and check the Inter-

net Status.

• If there is still no Internet access, try to reboot your computer and verify the

network's IP address and gateway address.

• Check the status indicators on the wireless router. If the Internet LED on the

wireless router is not ON, check if all cables are plugged properly.

Forgot the SSID (network name) or network password:

•

Set up a new SSID and encryption key via a wired connection (Ethernet cable).

Launch the web GUI, go to Network Map, click the router icon, enter a new SSID

and encryption key, and click Apply.

•

Reset your router to the default settings. Launch the web GUI, go to

Administration > Restore/Save/Upload Setting, and click Restore. The default

nordic9573_4g-n12_qsg.indb 13

2015/1/31 15:20:52