Baumer HUBNER POG 10 G Series Installation And Operating Instructions Manual - Page 12

Browse online or download pdf Installation And Operating Instructions Manual for Media Converter Baumer HUBNER POG 10 G Series. Baumer HUBNER POG 10 G Series 36 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 G Series: Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (28 pages), Mounting And Operating Instructions (32 pages)

Print Page

Montage / Mounting

Montage

In den Bildern am Beispiel vom POG 10 Stan-

dard. Gleiche Montageschritte bei allen anderen

Versionen.

5.1

Zul. Anzugsmoment

Max. tightening torque

= 2-3 Nm

5.2

* Siehe Seite 8

See page 8

Motorwelle einfetten!

Die Antriebswelle sollte einen mög-

lichst kleinen Rundlauffehler aufwei-

sen, da dieser zu einem Winkelfehler

führen kann. Außerdem verursachen

Rundlauffehler Vibrationen, die die

Lebensdauer des Drehgebers verkür-

zen können.



2.5 mm

Pictures showing standard POG 10 as example.

Same mounting steps for all versions.

5.1

5.2

10 mm

Lubricate motor shaft!

The drive shaft should have as less

runout as possible because this can

otherwise result in an angle error. In

addition, any radial deviation can

cause vibrations, which can shorten

the lifetime of the encoder.

Baumer_POG10-POG10G-T1_II_DE-EN (16A3)

MB069T1 - 11055669