Baumer HUBNER POG 10 G Series Installation And Operating Instructions Manual - Page 27
Browse online or download pdf Installation And Operating Instructions Manual for Media Converter Baumer HUBNER POG 10 G Series. Baumer HUBNER POG 10 G Series 36 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 G Series: Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (28 pages), Mounting And Operating Instructions (32 pages)
Print Page
7.5
Stromanschluss für Heizung
(Nur bei Version mit Heizung)
Kabellänge / Cable length ~1 m
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Motorkabeln ver-
legt werden.
Kabelabschluss:
HTL:
1 ... 3 kΩ
TTL:
120 Ω
Rot/Red = +UB
Blau/Blue =
Weiß/White = K1
Braun/Brown = K1
Grün/Green = K2
Gelb/Yellow = K2
Grau/Grey = K0
Rosa/Pink = K0
Schwarz/Black = Err*
Violett/Violet =
* Nur bei Version mit EMS
Only for version with EMS
MB069T1 - 11055669
*
Baumer_POG10-POG10G-T1_II_DE-EN (16A3)
Elektrischer Anschluss / Electrical connection
7.5
Power supply for heating
(Only for version with heating)
24 V = /~
P
= 6 W
max
7.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
HTL:
TTL:
Aderendhülsen benutzen.
Use core-end ferrules.
Kabelschirm
Cable shield
1 ... 3 kΩ
120 Ω
7
24