Baumer HUBNER POG 10 G Series Mounting And Operating Instructions - Page 21

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER POG 10 G Series. Baumer HUBNER POG 10 G Series 28 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 G Series: Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (32 pages)

Print Page

7.5

Sensorkabel HEK 8 (Zubehör)

Es wird empfohlen, das Baumer Hübner

Sensorkabel HEK 8 zu verwenden oder

ersatzweise ein geschirmtes, paarig ver-

seiltes Kabel. Das Kabel sollte in einem

Stück und getrennt von Stromkabeln

verlegt werden.

Kabelabschluss:

HTL: 1...3 kΩ

TTL: 120 Ω

Rot/Red = +UB

Blau/Blue =

Weiß/White = K1

Braun/Brown = K1

Grün/Green = K2

Gelb/Yellow = K2

Grau/Grey = K0

Rosa/Pink = K0

Schwarz/Black = ---

Violett/Violet = ---

MB145T1 - 11055758

Baumer_POG10-Cannon_T1_DE_EN_202201_MI_11055758 (22A1)

Elektrischer Anschluss / Electrical connection

7.5

Baumer Hübner sensor cable HEK 8 is

recommended. As a substitute a shielded

twisted pair cable should be used.

Continuous wiring without any splices or

couplings should be used. Separate signal

cables from power cables.

Cable terminating resistance:

HTL: 1...3 kΩ

TTL: 120 Ω

Aderendhülsen benutzen

Use core-end ferrules.

Kabelschirm

Cable shield