Baumer HUBNER POG 10 Series Mounting And Operating Instructions - Page 12

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER POG 10 Series. Baumer HUBNER POG 10 Series 28 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 Series: Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (32 pages)

Print Page
Baumer HUBNER POG 10 Series Mounting And Operating Instructions
5
Montage / Mounting
5

Montage

5.1

Schritt 1

Anzugsmoment:
Tightening torque:
M
= 1 Nm
t
*
9
5.2

Schritt 2

* Siehe Seite 8
See page 8
Antriebswelle einfetten.
Die Antriebswelle sollte einen
möglichst kleinen Rundlauffehler
aufweisen, da dieser zu einem
Winkelfehler führen kann.
Rundlauffehler verursachen Vibrati-
onen, die die Lebensdauer des
Gerätes verkürzen können.
9
2.5 mm
10 mm
Baumer_POG10-Cannon_T1_DE_EN_202201_MI_11055758 (22A1)
5

Mounting

5.1

Step 1

5.2

Step 2

*
8
7
Lubricate drive shaft.
The drive shaft should have as less
runout as possible because this can
otherwise result in an angle error.
Runouts can cause vibrations, which
can shorten the service life of the
device.
*
MB145T1 - 11055758