Baumer HUBNER POG 10 Series Mounting And Operating Instructions - Page 21

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER POG 10 Series. Baumer HUBNER POG 10 Series 28 pages. Incremental encoder (twin encoder)
Also for Baumer HUBNER POG 10 Series: Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (32 pages)

Print Page

7.5

Sensorkabel HEK 8 (Zubehör)

Es wird empfohlen, das Baumer Hübner

Sensorkabel HEK 8 zu verwenden oder

ersatzweise ein geschirmtes, paarig ver-

seiltes Kabel. Das Kabel sollte in einem

Stück und getrennt von Stromkabeln

verlegt werden.

Kabelabschluss:

HTL: 1...3 kΩ

TTL: 120 Ω

Rot/Red = +UB

Blau/Blue =

Weiß/White = K1

Braun/Brown = K1

Grün/Green = K2

Gelb/Yellow = K2

Grau/Grey = K0

Rosa/Pink = K0

Schwarz/Black = ---

Violett/Violet = ---

MB145T1 - 11055758

Baumer_POG10-Cannon_T1_DE_EN_202201_MI_11055758 (22A1)

Elektrischer Anschluss / Electrical connection

7.5

Baumer Hübner sensor cable HEK 8 is

recommended. As a substitute a shielded

twisted pair cable should be used.

Continuous wiring without any splices or

couplings should be used. Separate signal

cables from power cables.

Cable terminating resistance:

HTL: 1...3 kΩ

TTL: 120 Ω

Aderendhülsen benutzen

Use core-end ferrules.

Kabelschirm

Cable shield