Baumer CombiLyz AFI5 Operating Instruction - Page 6

Browse online or download pdf Operating Instruction for Measuring Instruments Baumer CombiLyz AFI5. Baumer CombiLyz AFI5 36 pages. Conductivity transmitter
Also for Baumer CombiLyz AFI5: Manual (7 pages)

Print Page
Baumer CombiLyz AFI5 Operating Instruction
English

Electrical connection

Left side electrical connection
Left side M12, 4-pin connector
1:
Brown
Supply (+)
2:
White
Cond. (-)
3:
Blue Supply (-)
4:
Black
Cond. (+)
Note:
If a M12 4-pin connector for left and right side is selected the
AFIx is direct compatible with the old Baumer ISL conductivity
transmitter.
To connect the FlexProgrammer to the transmitter
Com 1
Red clip
Com 2
Black clip
The data entered to the transmitter will automatically be uploaded to
the DFON display via the ribbon cable (UnitCom)
To connect the FlexProgrammer to the DFON display
Com 1
Red clip
Com 2
Black clip
For setting the colour changes, error messages, relay set-points etc.
To set the external input for range selection
Range
R1
1
N.C.
2
24 VDC
www.baumer.com
(Front view)
(15...35 vdc)
(4...20 mA)
(15...35 vdc)
(4...20 mA)
R2
Range
R1
N.C.
3
N.C.
N.C.
4
24 VDC
CombiLyz, AFI4 / AFI5
Operating Instruction
Right side electrical connection
Right side M12, 4-pin connector
1:
Brown
2:
White
3:
Blue
4:
Black
Note :
The pin 2 in left connection and pin 2 in right connection can
be connected as common - for both Con. and Temp. 4...20 mA
output.
Right side electrical connection with relay output
Temp. (-) (4...20 mA) -
R1 (external input) -
Right side M12, 8-pin connector
1:
White
2:
Brown
7:
Blue
8:
Red
Note:
The pin 2 in left connection and pin 7 in right connection can be
connected as common - for both Con. and Temp. 4...20 mA
output.
For AFIX with ranges below 10 mS/cm and all AFI5 a shielded
R2
cable must be used.
24 VDC
24 VDC
Electrical connection on the display with relay output
1:
Not connected
2:
Not connected
3:
Green
4:
Yellow
5:
Grey
6:
Light red
(3 + 5 can be connected
common)
UnitCom
To connect the
FlexProgrammer
COM 1
COM 2
(Front view)
R1
(external input)
Temp. (-)
(4...20 mA)
R2
(external input)
Temp. (+)
(4...20 mA)
5
4
Relay 1 -
- Relay 2
6
3
Relay 1 -
- Relay 2
7
2
- Temp (+)
1
8
- R2 (external input)
R1
(external input)
Temp. (+)
(4...20 mA)
Temp. (-)
(4...20 mA)
R2
(external input)
Relay 2
Relay 2
Relay 2
Relay 1
Relay 1
Ribbon cable
to transmitter
Com 1
Red clip
Black clip
Operating Instruction: 11126179 05
(4...20 mA)
3:
Green
Relay 2
4:
Yellow
Relay 2
5:
Grey
Relay 1
6:
Light red Relay 1
N.C. N.C.
Relay 1
Com 2
UnitCom
Page 6 / 36