ComAp AIO-NTC-BB Safety Manual - Page 5
Browse online or download pdf Safety Manual for Controller ComAp AIO-NTC-BB. ComAp AIO-NTC-BB 7 pages.
Print Page
Pict. 5 . Block scheme how to connect the Controller and MainsPro unit, in case circuit breaker is used for
GCB control – in SPI or SPtM application. For MGCB application the scheme is identical but instead of GCB
the MGCB signals are used.
This means, that both units serve as independent units and so each of them measures independently the
Mains parameters and in case the out of range is detected, both CB are tripped.
IGS-NT-1.0 – Safety Manual / ©ComAp – March 2014 / IGS-NT-1.0-SafetyManual rev.8.pdf
ComAp, a s.
Kundratka 2359/17
180 00 Praha 8
Czech Republic
IGS-NT Safety Manual 1.0 rev.8
ISO 9001 Certified
Page 5 of 7
Tel.: +420 246012111
Fax: +420 2 66316647
E-mail: [email protected]
Internet: http://www.comap.cz