ComAp 3760XBI Quick Start - Page 2
Browse online or download pdf Quick Start for Measuring Instruments ComAp 3760XBI. ComAp 3760XBI 4 pages.
Print Page
2. Configuration
Pre-recorded valve selection
Before starting to measure, please specify the valve
Select a pre-recorded valve
VALVE
To use identical valves several times, just modify the setting.
PRESET
Measure by kv value
If the valve cannot be found, and the value of the kv is known, the kv value is needed.
Proceed as previously to select in the valves list « Direct Kv » then « 0 – 50000 »
Enter the Kv value
PRESET
Entering value
Each value is entered digit by digit
ZERO
PRESET
3. Changing the fluid
The fluid type is displayed on the left bottom of the screen
MENU
4. Connect
Resetting
This procedure should be done when restarting the device. Recommended before all measure.
ZERO
1. Connect the hoses to the valve:
Red: Valve upstream
Blue: Valve downstream
© 2021 Comap. Tous droits réservés. Nous nous réservons le droit d'apporter des
changements quant à la conception et quant aux spécifications techniques de nos produits.
Page 2 - 00012 - ENG - 2021-12
OK
OK
Direct Kv
OK
Deletes the last digit
Validates and creates a new digit
Next field (OK)
OK
Comap
OK
Max : 40
Enter the position indicated
32.0
on the display of the valve
Min: 5
Enter the appropriate kv
23.5
value
Min: 5
Fluid
Select the type, concentra-
tion and temperature
Measuring device 3760XBI
750 AB
DN 20
Decreases the value of the digit (0-9
and .)
Increases the value of the digit (0-9
and .)