Asus AP100 Hardware Reference Manual - Page 8

Browse online or download pdf Hardware Reference Manual for Server Asus AP100. Asus AP100 32 pages. Pentium ii startup server

Print Page

This Server

The AP100 is a startup server configured on the ASUS P2B-S smart mother-

board which uses the 440BX chipset from Intel which supports the Pentium II

processor and 100MHz front side bus in order to support any complicated task.

If assembling this server by yourself, it is important to prepare all the server

components before starting. This will save a great deal of time by not hav-

ing to hunt down components. The following checklist provides a guideline

as to the necessary components for a server.

Standard components

Chassis:

Power Supply:

Motherboard:

CD-ROM Drive:

Floppy Drive:

Cables:

SCSI Terminator:

User's Manuals:

Drivers/Utilities:

Required components (you may purchase from ASUS or from a third party)

Processor (CPU):

Memory Modules:

Hard Disk Drives:

Optional components (you may purchase from ASUS or from a third party)

Ethernet Card:

NOTE:

Optional components are ordered on demand and may not always

be available in the quantities desired.

I. Introduction

ASUS T-10 Tower

350W ATX

ASUS P2B-S

ASUS 34X

1.44MB

Power, IDE, Floppy, 50&68pin SCSI, CD audio cable

Passive terminator for 68pin SCSI cables.

CD-ROM, SCSI, Motherboard

SCSI, CD-ROM, Motherboard

(optional Intel Pentium II 233MHz-450MHz)

(optional ASUS 16MB or 32MB SDRAM)

(optional 4/9GB Ultra2 or Fast/Ultra-Wide SCSI)

(optional ASUS PCI-L101)

AP100 Hardware Reference Guide