Asus AP140R User Manual - Page 22

Browse online or download pdf User Manual for Server Asus AP140R. Asus AP140R 44 pages. Pentium 4 1u rackmount server

Print Page

2.5 Installing a Hard Disk Drive

The server comes with three externally accessible drive bays. Due to

mechanical issues, the drive tray's connector board may not fit some

hard drives. Make sure the connector board will fit the hard drive before

purchasing. Do not force the connector board onto the hard drive.

In each of the drive bays is a

removable tray for mounting a hard

disk drive. Flip open the tray levers

to release the tray, then pull the tray

out of the chassis.

1. Set hard drive to "Cable Select".

2. Remove the connector board.

3. Place hard drive into drive tray.

4. Secure the drive using 4 screws.

5. Attach connector board to drive.

6. Secure the connector board

using the original two screws.

Example: IBM hard drive's default is "Master".

You must change to "Cable Select" for this server.

Install the Hard Drive

After the drive is secured to the tray,

carefully insert the drive into the bay,

then push the levers back into place.

Tray Levers

Chapter 2: Hardware Setup

Connector Board