Amphenol PL18 30 Series Assembly Manual - Page 3
Browse online or download pdf Assembly Manual for Cables and connectors Amphenol PL18 30 Series. Amphenol PL18 30 Series 9 pages. G70-1pos powerlok 10mm g2 180d plug connector
Print PageG70-单芯2代10mm直头组装式连接器安装说明 The Assembly manual for G70 1POS PowerLok 10mm G2 180D Plug Connector
步骤1：穿配件
Step1：Assemble the accessories
1-1 线缆准备
1-1 Cable preparation
300/301 Series
1-2 取各1pcs的⑪尾盖, ⑩密封圈，⑨金属垫圈和⑧内铜环, 从右边依次穿过线缆
1-2 Take each 1pcs of ⑪ end cap, ⑩ Sealing, ⑨Metal gasket and ⑧ Inside Copper ring ，and make them
pass through the cable from right in sequence
⑨Metal Gasket
金属垫圈
⑧Inside Copper Ring
内铜环
步骤2：剥线皮，按表2尺寸剥离线缆绝缘皮和外被
Step 2：Stripping, Strip off cable insulation and jacket as following size from the table 2
连接器
Connector
300/301系列
300/301 Series
注意 : 剥皮完成之后，裁剪屏蔽保留C mm(看上方表2)，并将屏蔽线向后翻180°
Note : After wire stripping, cutting shielded leave over Cmm(see table 2) and fold back the shielding braid
Rev.01 20220225 Document No: 8P1161
第二部分：插头组装
Part 2: Plug Assembly
Table 1：G70 Cable size
连接器
Connector
conductor area(mm²)
300/301 系列
外套剥线长度 A
Stripping jacket (mm)
36±0.5
表1：G70 线材规格
导线截面积
50mm²
表2：剥线长度
Table 2：Strip length
绝缘皮剥线长 B
Stripping insulation (mm)
19 +1/-0.5
线缆外径
Accepted cable OD (mm)
17.0±0.3
⑪End Cap
尾盖
⑩Sealing
密封圈
保留屏蔽长度 C
Leave over shielding(mm)
7±1
02-07