Baumer HOGS 75 K Installation And Operating Manual - Page 14
Browse online or download pdf Installation And Operating Manual for Industrial Equipment Baumer HOGS 75 K. Baumer HOGS 75 K 32 pages. Sine encoder
Also for Baumer HOGS 75 K: Mounting And Operating Instructions (32 pages), Installation And Operating Instructions Manual (36 pages), Mounting And Operating Instructions (32 pages)
Print Page
5
Montage / Mounting
5.3
Schritt 3
Motorwelle einfetten!
Die Antriebswelle sollte einen mög-
lichst kleinen Rundlauffehler aufwei-
sen, da dieser zu einem Winkelfehler
führen kann (siehe Abschnitt 5.7).
Außerdem verursachen Rundlauffeh-
ler Vibrationen, die die Lebensdauer
des Sinus Drehgebers verkürzen
können.
11
5.3
Step 3
Zentrierbohrung
Center hole
DIN 332-D, M6x16 mm
1:10
Lubricate motor shaft!
The drive shaft should have as less
runout as possible because this can
otherwise result in an angle error
(see section 5.7). In addition, any ra-
dial deviation can cause vibrations,
which can shorten the lifetime of the
sine encoder.
Baumer_HOGS75K-A-T1_II_DE-EN (16A2)
MB175aT1 - 11173568