Baumer HUBNER BERLIN HOG 10 Mounting And Operating Instructions - Page 5

Browse online or download pdf Mounting And Operating Instructions for Industrial Equipment Baumer HUBNER BERLIN HOG 10. Baumer HUBNER BERLIN HOG 10 40 pages. Incremental encoder with connecting cable ölfle
Also for Baumer HUBNER BERLIN HOG 10: Installation And Operating Instructions Manual (36 pages), Installation And Operating Instructions Manual (40 pages), Installation And Operating Instructions Manual (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (40 pages), Mounting And Operating Instructions (32 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (36 pages), Mounting And Operating Instructions (28 pages)

Print Page

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger



General information for attention

Informations to ensure correct device operation

Information

Recommendation for device handling

1.2

The combination HOG 10 + FSL is an opto electro nic precision measurement device and a

mechanically operated switching device which must be handled with care by skilled personnel

only.

1.3

The expected service life of the device depends on the ball bearings, which are equipped with a

permanent lubrication.

1.4

The storage temperature range of the device is between -15 °C and +70 °C.

1.5

The operating temperature range of the device is between -40 °C and +100 °C

(>3072 pulses per revolution: -25...+100 °C; Option heating: -50...+100 °C),

measured at the housing.

1.6

EU Declaration of Conformity meeting to the European Directives.

1.7

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.8

Maintenance work is not necessary. The device may be only opened as described in this instruc-

tion. Repair work that requires opening the device completely must be carried out by the manu-

facturer. Alterations of the device are not permitted.

1.9

In the event of queries or subsequent deliveries, the data on the device type label must be

quoted, especially the type designation and the serial number.

1.10

Device components are to be disposed of according to the regulations prevailing in the re-

spective country.

Warning!

Damaging the seal

MB071.1T2 - 11069399

on the device invalidates warranty.

Baumer_HOG10-FSL-T2_II_DE-EN (17A2)

General notes

