Baumer HUBNER EExME 12 Mounting And Operating Instructions - Page 5

Browse online or download pdf Mounting And Operating Instructions for Industrial Equipment Baumer HUBNER EExME 12. Baumer HUBNER EExME 12 24 pages. Explosion-proof motor earthing device

Print Page

General notes

1.1

Symbol guide:

Danger

Warnings of possible danger

General information for attention

Informations to ensure correct device operation

Information

Recommendation for device handling

1.2

The explosion-proof motor earthing device EExME 12 is a device for leakage of paraseti-

cal shaft currents which must be handled with care by skilled personnel only.

1.3

The expected service life of the device depends on the ball bearings, which are equipped with

a permanent lubrication.

1.4

The expected service life of carbon brushes depends on the electrical current and is usually

consistent with the service life of the ball bearings. Replacement of the carbon brushes is only a

recommended precaution.

1.5

The storage temperature range of the device is between -15 °C and +70 °C.

1.6

In Ex areas the device must only be used within the ambient temperature range

from -55 °C to +50 °C for T5 and -55 °C to +60 °C for T4.

External heat sources such as attached installations must not exceed the maximum

ambient temperature range.

1.7

EU Declaration of Conformity meeting to the European Directives.

1.8

We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association

of the German Electrical Industry).

1.9

Repair or maintenance work must be carried out by the manufacturer. Alterations of the de-

vice are not permitted.

Contravention invalidates the EX approval.

1.10

In the event of queries or subsequent deliveries, the data on the device type label must be

quoted, especially the type designation and the serial number.

1.11

Disposal (environmental protection):

Do not dispose of electrical and electronic equipment in household waste. The product

contains valuable raw materials for recycling. Whenever possible, waste electrical and

electronic equipment should be disposed locally at the authorized collection point. If

necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-

ally. For further information see www.baumer.com.

Warning!

Damaging the seal

MB052T1 - 11080038

on the device invalidates warranty.

Baumer_EEXME12-T1_II_DE-EN (19A1)

General notes