Amphenol Temposonics MH Series User Manual - Page 4
Browse online or download pdf User Manual for Accessories Amphenol Temposonics MH Series. Amphenol Temposonics MH Series 12 pages. Analogue/pwm tester
Also for Amphenol Temposonics MH Series: Operating Manual (18 pages)
Print Page
M-Series Tester
User's Manual
1. The M-Series analogue/PWM Test Kit (continued)
1.2 Familiarizing yourself with the M-Series Tester
1.2.1 Front panel
1. LCD panel
Tester LCD panel displays sensor output, settings, and battery level
2. Power switch
Toggle to turn the M-Series Tester 'ON' and 'OFF'.
3. Mode button (A)
Press to change transducer modes and to reset system.
4. Special function button (B)
Press to change recirculation values in PWM TOF mode
1.2.2 Top Panel
1. Charger port
Port used to charge the battery
2. +5 V
Sensor 5 volt supply connection (Not an input port)
3. +12 V
Sensor 12 volt supply connection (Not an input port)
4. GND
Sensor ground connection.
5. ANA
Connection for sensors with analogue output signal.
6. PWM
Connection for sensors with PWM/TOF output signal.
MTS Sensors
2
1
I
4
I
1
4
3
5
4
2
+5V
GND
ANA
− − − −
+12V
3
6
PWM