Foldcraft Plymold Contour Installation Manual - Page 8

Browse online or download pdf Installation Manual for Outdoor Furnishing Foldcraft Plymold Contour. Foldcraft Plymold Contour 9 pages. Wall style adjustable

Print Page
Contour
Assembly
Step 5: Installing Vertical Table Leg
a. Assemble a plastic thread-in glide into insert if not already done.
b. Position table per drawings above.
c. Secure the table top using (6) #10 x 1.0" screws.
Note: Vertical Table leg required on tops longer than 48" and ADA tops.
Step 6: Position and Level Booth
a. Confirm location of booth/frames with the floor plan.
b. Level booth by adjusting glides.
Step 7: Fasten Glides to Floor
a. Rotate glides to point the mounting hole towards the center
of the booth.
b. With a pencil, mark the hole location on the floor using the
holes in the glide.
c. Turn the glide away 90 degrees from its current position to
expose the mark on the floor.
d. Using a hammer drill and a 1/4" masonry bit, drill a 1 1/4"
deep hole on the pencil mark.
e. Place a plastic anchor in the hole and then rotate glide back so the hole lines up with
the plastic anchor in the floor.
f.
Insert a #10 x 1.0" screw through the hole in the glide and secure into the plastic
anchor.
Note: Frames must be anchored to the floor to maintain stability and prevent
personal injury.
Page 8 of 9