Advanced Axis AX-LED32R Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Control Unit Advanced Axis AX-LED32R. Advanced Axis AX-LED32R 20 pages. Switch led modules
Print Page
Note: The AX-ASW-16 switch LED module cannot be installed on the outer door of the AX-CTL-1 panel, as
there is no method of disabling (enable/disable key switch control) operation of the 16 switches associated
with the module.
To install a Switch LED Module in an Axis
holding the blank aperture in place and replace it with the Switch LED Module (see figure 2).
2.2 AX-LZA Cabinet Mounting
In addition to being mounted in an Axis
local zone annunciator cabinet. Advanced has three sizes of local zone annunciator cabinets, an AX-LZA-CAB1,
AX-LZA-CAB2 and an AX-LZA-CAB4. The AX-LZA-CAB1 has a single aperture (opening/slot), while the AX-LZA-
CAB2 has two apertures (openings/slots) and the AX-LZA-CAB4 has four apertures [openings/slots] (see figure 3).
AX-LZA-CAB1
Note: AX-LZA-CAB's are available in gray or red colors.
www.advancedco.com
www.advancedco.com
AX
panel aperture (opening/slot), simply remove the nuts and washers
Figure 2 – Switch LED Module Enclosure Aperture Mounting
AX
enclosure, Switch LED Modules can also be mounted in an Advanced
AX-LZA-CAB2
Figure 3 – Remote Switch LED Module Cabinet
AX-LZA-CAB4
5