Amphony RX1 User And Installation Manual - Page 7

Browse online or download pdf User And Installation Manual for Transmitter Amphony RX1. Amphony RX1 18 pages. Digital wireless audio transmitter / receiver

User and Installation Guide
Pairing the transmitter and receiver
In order for the transmitter and receiver to communicate, they need to be
paired. To pair the transmitter and receiver, push the transmitter pairing
button. The transmit light will start flashing.
Next, push the pairing button of the receiver which is located on the bottom
of the receiver.
You must push the receiver pairing button within one minute after you have
pushed the transmitter pairing button.
You can add up to 3 more receivers to receive the signal from the transmitter
(maximum of 4 receivers in total). Pair each additional receiver as shown
above.
Description of the transmit and receive light
Transmitter
Flashing Slowly
Flashing Quickly - Pairing mode
Constantly On
Receiver
Flashing Slowly
Constantly On
Page 7
- No receivers detected
- Transmitting signal
- No transmitters detected
- Receiving valid audio signal
R