Follett 50HI425A Installation Manual - Page 2
Browse online or download pdf Installation Manual for Ice Maker Follett 50HI425A. Follett 50HI425A 17 pages. Ice and water dispensers
Print Page
§ Do not tilt unit further than 30° off vertical during uncrating or installation.
§ Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at all times. If
access to this area is required, power to unit must be disconnected first.
§ Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard capacity
#00130229, high capacity #00978957, carbonless high capacity #01050442).
§ Prior to operation, clean the dispenser in accordance with instructions found in this manual.
§ Ice is slippery. Be sure counters and floors around dispenser are clean, dry and free of ice.
§ Do not block left side air intake or right side air exhaust.
Specifications
Countertop
Front View
21" (53.4 cm)
25CI425A/W
36"
(91.5 cm)
50CI425A/W
40"
(101.6 cm)
Wall mount
Front View
21.5" (54.6 cm)
25HI425A/W
36.5"
(92.7 cm)
50HI425A/W
40.5"
(102.9 cm)
* Includes 0.5" (13 mm) for bracket supplied with unit.
2
25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A
CAUTION!
Right Side View
24" (61 cm)
10.5"
14.25"
(26.7 cm)
(36.2 cm)
23"
(58.5 cm)
Right Side View
24.5" (62.2 cm)*
14.25"
(36.2 cm)
17"
(43.2 cm)
Rear View
3/8" FPT
condenser
inlet (water-
cooled only)
3/8" FPT
condenser
outlet (water-
cooled only)
3/4" FPT
drain
NEMA
5-15
0.88 (23 mm)
DRAIN
3/4 MPT MALE
10.5"
(26.7 cm)
Rear View
NEMA
5-15
21.5" (54.6 cm)
3/8" water
inlet
2.63" (6.6 cm)
1.38" (3.5 cm)
2.56" (6.5 cm)
5.69" (14.4 cm)
7.69" (19.5 cm)