Dovre 2000CBGL Installation Instructions & Operating Manual - Page 8

Browse online or download pdf Installation Instructions & Operating Manual for Indoor Fireplace Dovre 2000CBGL. Dovre 2000CBGL 20 pages.

Print Page

3.2.2. Assembly of the smoke dome and of the flue collar

The smoke dome must

be fixed to the top of

the device and attached

by means of the clamps

supplied. A ssure proper

sealing by means of the

kit or paste supplied.

It is recommended to

install the smoke dome

with its exhaust bac k-

wards. In case of proper

draft, it may be turned

up to 90° to the left or to

the right if required for

installation. In case of

lower draft, an angle of

maximum 60° is recom -

mended.

The flue collar can be

installed either horizon-

tally or vertically. Fix the

flue collar on the smoke

dome

with

M6x30, 2 nuts M6, and

4 collars Ø6xØ12. Assure proper sealing with kit or paste.

3.2.3. Installation of the ashtray (if applicable)

The optional ashtray is installed as follows:

•

Lift the plate in the middle of

the bottom brick; insert a

screwdriver into the hole to

lift the brick (if necessary, tap

the brick with a hammer to

loosen it).

•

Extrude the pre -cut plate from

the bottom heat shield.

•

Clean the sealing edge and

put the supplied rope (diam.

6 mm) in the groove; install

then the ashtray holder.

•

Tighten the 4 plate screws in

the ashtray holder and assure

proper sealing with kit or

paste.

•

You can now install the ashtray and the grid.

2000CB

bolts

KIT

03.27997.000