Ampler Bilberry User Manual - Page 5
Browse online or download pdf User Manual for Scooter Ampler Bilberry. Ampler Bilberry 16 pages. 2017
Print Page5/16
Adjust the seat height
Turning the bike on
Rear light modes
Charging
V1.1, 24.04.19
Assembly
Take the 5 mm hex key and adjust the perfect seat height
1. Place the bike in a way that allows you to support
yourself against a wall when sitting on it.
2. Put one pedal in its lowest position.
3. Hop on and try to reach the pedal with your heel.
4. You have the perfect seat height when you are able
to place your heel on the pedal with an almost fully
stretched leg.
And you are good to go!
5 mm
Power on the bike
Turning the bike on is simple. Just press the button
on the user interface, located on the left side of the
bike.
Turning the bike on is simple. Just press the button
on the user interface, located on the left side of the
bike.
Another cool feature of the rear light is that by pres-
sing the top led you are able to change the light mo-
des from Constant, blinking or "Knight Rider".
Charging the bike is similar to charging a laptop. Just
hook the magnetic charger plug to the charging so-
cket located on the user interface and let it to charge.
Once the led on the charger turns from red to green it
has been fully charged