Follett HCD1000NJS Manual - Page 2
Browse online or download pdf Manual for Ice Maker Follett HCD1000NJS. Follett HCD1000NJS 8 pages. For drop-ins
Also for Follett HCD1000NJS: Manual (8 pages), Installation Instructions Manual (17 pages)
Print Page
Horizon
Chewblet ice machine
1
Locating the ice machine
Horizon remote condensing unit Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand
up to 75 ft (22.9 m) from the dispenser or ice bin with RIDE technology (10' (3 m) for Micro Chewblet ice). Evaporator/ice machine must
be mounted within 100 feet (30.5 m) of Follett remote condensing unit. RIDE applications require special attention to service access and
ice tube runs (see page 3-5).
Top mounting – ice & beverage
dispensers (by others)
Important specifier notes:
1. Dispenser must be compatible with
nugget ice. See page 3 for compatible
ice & beverage dispenser models and
top kit numbers.
2. Verify ceiling or soffit height to ensure
sufficient top clearance.
RIDE model – ice & beverage
dispensers (by others)
Important specifier notes:
1. Dispenser must be compatible with
nugget ice. Compatible dispensers
include Cornelius DB/ID/DF150/175,
Lancer 4500-22N & FS-16N, Servend
MD150/175/200/250, SV175/200/250
and Coca-Cola Freestyle. As well as
dispensers listed on page 3.
2
Form# 3815
1000 series 1400 series or 1650 series
with remote air-cooled condensing unit
RIDE model – Follett low-profile
Vision ice & beverage dispensers
Important specifier notes:
1. See page 3-5 for critical clearance &
venting requirements.
RIDE model – drop-in beverage
dispensers (by others)
Important specifier notes:
1. See form# 3425 for qualified
applications.
Follett Corporation
801 Church Lane • Easton, PA 18040, USA
+1 (610) 252-7301 • Fax +1 (610) 250-0696
www.follettice.com
Locating the ice machine
Top mount on
Follett ice storage bins
Important specifier notes:
1. See form# B300 for bin sizing.
2. Verify ceiling or soffit height to ensure
top clearance.
3. Locate floor sink or grate & drains in
front of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce
™
bin cart.
RIDE model –
Follett ice storage bins
Important specifier notes:
1. See form# B300 for bin sizing.
3. Locate floor sink or grate & drains in
front of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce bin cart.
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 • Fax +48 (58) 785-6159
www.folletteurope.com