Combi-Camp Trailer Instruction Book - Page 11

Browse online or download pdf Instruction Book for Utility Vehicle Combi-Camp Trailer. Combi-Camp Trailer 20 pages. Trailer tent

Print Page

A c c e s so ri es to the traile r tent

Fitting the annex:

• The detachable side of the trailer's

body canvas is zipped out.

• The annex cabin is zipped in.

• The poles with the accompanying

two round corners are put into

the sleeve inside the annex.

• The support poles with hook end

are put into the two holes in the

trailers steel section at the floor.

• The last two support poles can

then be placed between the roun-

ded corners and the annex floor.

• The nylon floor of the annex is

then stretched and pegged all the

way round, do not over tighten.

• Finally place the fibre glass pole

inside the ventilation flap, where

after the inner tent is fitted.

The door canopy is fitted as

follows:

The door canopy is zipped together

and the frames are attached and

fitted with guy ropes.

Extra sun canopy is fitted as

shown:

The sun canopy has 3 brass eyelets

in each end.The one fits the awning

frames spigots and is then attached

to the guy rope on each side.

The 3 legs are fitted and pegged

with the guy rope