Acer Veriton Z6610G User Manual - Page 18

Browse online or download pdf User Manual for Desktop Acer Veriton Z6610G. Acer Veriton Z6610G 38 pages. Acer veriton l4610g: user guide

Print Page

Note: Refer to the monitor manual for additional instructions

and information.

Connecting the power cable

Caution: Before you proceed, check the voltage range in your

area. Make sure that it matches your computer's voltage setting. If

they don't match, change your computer's voltage setting

according to your area's voltage range.

Set the voltage selector switch to the voltage range applicable to your area.

Plug the power cable into the power cable socket located on the rear panel of

your computer. Then plug the other end of the power cable into a power

outlet.

After connecting the necessary peripherals and plugging in the power cable,

you are now ready to turn the computer on and get to work.

To turn on your computer:

Turn on all peripherals connected to your computer, such as the monitor,

printer, speakers, etc.

On the front panel of your computer, press the power button.

Important: Make sure that the power cable is properly plugged

into an electrical outlet. If you are using a power strip or an AVR

(Auto-Voltage Regulator), make sure that it is plugged in and

turned on.

If you cannot shut down your computer normally, press and hold the power

button for at least four seconds. Quickly pressing the button may put the

computer in suspend mode only.

2 Setting up your computer