COMBISAFE 9530 User Instruction - Page 3

Browse online or download pdf User Instruction for Safety Equipment COMBISAFE 9530. COMBISAFE 9530 4 pages. Barrier box
Also for COMBISAFE 9530: User Instruction (2 pages)

Print Page
COMBISAFE 9530 User Instruction
Don’t stack
beyond this
point
800 mm
1130 mm
COMBISAFE
1
Stacking barriers in the box
It’s importent to stack the barriers correctly in the
box. Otherwise the barrier stack will become too
high and unstable.
2
Place every second barrier in opposite direction, i.e
every second barrier with the toebord upwards.
1
Make sure that the barriers are placed centered in
2
the box to avoid overturning.
1
Don’t stack barriers above the beam.
2
The barriers weigh 19,5 kg and can be handled by
one person, but it is recommended for frequent
loading and unloading to be carried out by two
persons or to use lifting equipment. Don’t move or
lift the box by hand.
Refer to current Health and safety regulations
applicable to country of use to ensure compliance.
Safety precaution
Before every use
Always check the Barrier Boxes for any signs of
damage or visible deformation.
Don’t use boxes that don’t pass checks according
to the following checklist:
Checklist
- Crack free and notch-free welds
- Deformation
- Corrosion
- Damage
- Wearing
- Visible Combisafe label and ID number
- Deformed or damaged lifting eyes
1142 mm
- No sharp edges
If in doubt, consult Combisafe!
Annual Inspection
It is recommended that the box is inspected at least
once a year by a trained competent person unless
stated otherwise in a community country of use.
®