Caraudio-Systems USB-C25 Manual - Page 6

Browse online or download pdf Manual for Automobile Accessories Caraudio-Systems USB-C25. Caraudio-Systems USB-C25 14 pages. Usblogic usb-av-player compatible with navigation systems mercedes benz comand 2.5

Print Page

3.1.

Connections to the Comand

Place of installation is behind the Comand. Remove the head-unit from the dash-board.

If female 8pin C1 connector of factory harness exists, transfer pins from female 8pin

C1 connector of C2C-MB25 to corresponding slots of female 8pin C1 connector of

factory harness. If slots are occupied remove and isolate factory wires (take notes

before removing).

Otherwise use female 8pin C1 connector of C2C-MB25 instead of factory connector.

Connect yellow loose wire (CAN high) C2C-MB25

to pin 18 of chamber C2. Connect loose blue wire

(CAN low) of C2C-MB25 to pin 17 of chamber C2.

Connect loose red wire of C2C-MB25 to pin 4

of chamber A (+12V battery power).

Connect loose black wire of C2C-MB25 to pin 8

of chamber A (ground).

Plug female 8pin C1 connector of factory harness

(if not existing, of C2C-MB25) into C1 slot of

Comand's male system connector.

Plug male 5pin DIN connector of harness C2C-MB25 into female 5pin DIN socket on

the Comand's rear.

Version 31.08.2011

17 18

USB-C25