Follett Horizon Elite HCD1410NHT Installation Instructions Manual - Page 5

Browse online or download pdf Installation Instructions Manual for Ice Maker Follett Horizon Elite HCD1410NHT. Follett Horizon Elite HCD1410NHT 17 pages. Top-mount applications
Also for Follett Horizon Elite HCD1410NHT: Installation Instructions Manual (17 pages), Manual (8 pages), Manual (8 pages)

Follett Horizon Elite HCD1410NHT Installation Instructions Manual

Prepare the installation site.

Provide drainage, water supply and electrical power to within 6 feet (2 m) of
ice machine in accordance with local and national codes. Outdoor installation
of low side is not recommended and will void warranty.
2.1
2.1
Installation site requirements
1/4" per foot
(6,4 mm per 0,3 m)
Electrical
• 120/60/1-5 amps
Potable water supply
• 10–70 psi (69–483 kpa)
• 45–90 F (7–32 C)
• Follett recommends the use of an in-line water filtration system (item# 00130286)
• This equipment is to be installed with adequate backflow protection to comply with applicable
federal, state, and local codes
Drain
(3/4" Barb)
• Minimum 8" radius on silicone drain line. Drain line from the ice machine must have at least
1/4" per foot pitch (6,4 mm/0,3 m).
Refrigeration lines
• 5/8" ∅ (15,8 mm) diameter suction line (insulated)
• 3/8" ∅ (9,5 mm) liquid line
HARMONY • TOP-MOUNT
3/8" ∅ (9,5 mm)
5/8" ∅ (15,8 mm)
1'
(3/8" push-in internal connection, 3/8" OD tubing required)
remote condensing
silicone tubing
3/4" barb x 3/4" FPT
3/4" MPT x 1" slip
1" Stand pipe/Drain
NEMA
5-15

Site preparation

Minimum 8"
radius
2 ft. x 1" OD
2
5