Caraudio-Systems RL-MFD1 Manual - Page 5

Browse online or download pdf Manual for Car Video System Caraudio-Systems RL-MFD1. Caraudio-Systems RL-MFD1 8 pages. R.link-interface

Print Page

3.1.

Interconnecting Interface-Box, harness and head-unit

Plug harness RLC-VN01 into 12pin Molex of Interface-box RLC-M02.

Plug male 10pin DIN-connector of RLC-VN01 into female 10pin DIN-connector of

head-unit.

If connecting an AV-source:

Connect red wire of harness RLC-VN01 to +12V ACC and black wire of harness

RLC-VW02 to ground. Connect the blue wire to +12V ACC by using the interface with

Audi Navigation Plus, do not connect the blue wire with VW MFD1.

If connecting a rear-view camera:

Connect red and blue wire of harness RLC-VN01 to +12V reverse gear light (we

suggest to connect through relais to avoid signal noise) and black wire of harness

RLC-VW02 to ground.

Note: If the female 10pin DIN-connector of the head-unit is already occupied, the vehicle has

a factory TV-tuner. In this case it must be uninstalled: disconnect the male 10pin DIN-

connector of the factory harness and disconnect all wires from the factory TV-tuner.

Version 04.11.2022

RL-MFD1