Caraudio-Systems TV-BM01 Manual - Page 4

Browse online or download pdf Manual for Car Video System Caraudio-Systems TV-BM01. Caraudio-Systems TV-BM01 5 pages. Tv-free video-in-motion interface compatible with bmw professional nbt navigation systems

Print Page
Pin-assignment of the CAN-box TV-500 (Molex 8-Pin)
Cable colour
Pin-No. Assignment
●
Yellow
Pin 4
●
Blue
Pin 3
●● Yellow/Black Pin 8
●● Blue/Black
Pin 7
●
Red
Pin 1
●
Black
Pin 5
●
Green
Pin 6
●
White
Pin 2

2. Installation

Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Note: Any existing fiber optical cables on the original Quadlock plug must be reconnected to
the TV-BMW01 harness.

3. Activation of the video-in-motion function

The video-in-motion can be activated and deactivated by Dip 1 or alternatively by the
included loose green cable in connection with a switch (not included in delivery).
Video-in-motion permanent
With dip1 to ON the video-in-motion function is activated permanently without disturbing
the navigation performance.
Video-in-motion selective
With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Connect a switch to the green cable and connect the green cable to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
Note: The loose white cable is not required and must be isolated.
Version 26.03.2019
All manuals and user guides at all-guides.com
CAN-HIGH – connection to the head-unit
CAN-LOW – connection to the head-unit
CAN-HIGH – connection to the vehicle
CAN-LOW – connection to the vehicle
+12V permanent
Ground
Activation of the video-in-motion function
(+12V = TV-free activated)
Trigger output (+12V DC 500mA)
TF-NBT