Caraudio-Systems usbLOGiC USB-NTG25 Manual - Page 12

Browse online or download pdf Manual for TV Tuner Caraudio-Systems usbLOGiC USB-NTG25. Caraudio-Systems usbLOGiC USB-NTG25 14 pages. For mercedes benz comand aps ntg2.5 navigation systems

Print Page

4. Operation

4.1.

Activation of the video-in-motion function

The video-in-motion function is activated is by pressing the "hang up"

button on the steering-wheel for more than 3 seconds. Repeat action

to deactivate the video in motion function.

Note: As long as the video-in-motion function is activated, the navigation of the command

will NOT be working!

4.2.

Selecting the usbLOGiC as current AV-source

Push the OK button of the Comand and then select TV to choose the usbLOGiC as current

AV-source.

4.3.

Switching between internal USB and AV-input

After selecting the usbLOGiC as current AV-source, push "0"-button to switch from internal

DVB-T to AV-input. Repeat to switch back to internal USB.

Note: If the AV-input is deactivated (see chapter "Deactivating usbLOGiC AV-input"), it is not

possible to switch to the usbLOGiC's AV-input.

4.4.

Assigning device control for connected AV-source

After selecting the usbLOGiC as current

AV-source, push "

-button. The OSD will

show "Channel [][] Prog [][]". Now enter the

device-related IR-code as described in device

control table (appendix A), followed by

number "12" and push "OK"-button to

confirm the assignment.

Note: If the AV-input is deactivated (see chapter "Deactivating usbLOGiC AV-input"), it is not

necessary, nor possible to assign device controls.

Version 22.12.2011

USB-NTG25