Caraudio-Systems c.LOGiC C2-CIC Manual - Page 4

Browse online or download pdf Manual for Automobile Electronics Caraudio-Systems c.LOGiC C2-CIC. Caraudio-Systems c.LOGiC C2-CIC 13 pages. For bmw professional navigation systems with idrive and 6.5”/8.8” monitor

Print Page

1.3.

Setting the dip switches of the CAN-box TV-436

Vehicles with CIC

Vehicles with CCC

1.4.

Setting the dip switches of the MOST®-box C2C-M336

The default dip switch settings of the MOST®-box

need to be changes ONLY if an after-market

rear-view camera shall be connected or if AV2 of

the c.LOGiC shall be deactivated. The dip

switches are located inside the MOST®-box.

For changes it is necessary to open the box.

Default settings are:

dip1 = ON, dip2 = OFF, dip3 = OFF

1.4.1. Rear-view camera

If a rear-view camera shall be or is connected, in order for the

c.LOGiC to automatically switch to its camera input,

set dip2 = ON (up).

Note: Automatic switching to after-market rear-view camera works

only from interface mode.

1.4.2. Deactivating c.LOGiC AV2 input

If only one AV-source shall be connected to the c.LOGiC, we recommend

to disable AV2, to avoid customers switching by mistake to black/no

picture of AV2. In order to disable the AV2 input of the c.LOGiC,

set dip1 = OFF (down).

Note: Additional measures relating to the deactivation of AV2 are described in chapter

Assigning device control .

Version 22.03.2011

dip 1 ON, dip 2 OFF, dip 3 OFF

dip 1 OFF, dip 2 OFF, dip 3 OFF

Dip switches

of MOST®-box

C2-CCC/C2-CIC