Dahua DH-PFS3009-8ET-96 Quick Start Manual - Page 15

Browse online or download pdf Quick Start Manual for Switch Dahua DH-PFS3009-8ET-96. Dahua DH-PFS3009-8ET-96 17 pages. 4&8-port unmanaged desktop switch

Print Page

4.4 Connecting Ethernet Port

The Ethernet port is a standard RJ-45 port. With its self-adaptation function, it can be automatically

configured to full duplex/half-duplex operation mode. It supports MDI/MDI-X self-recognition of the

cable, allowing you to use a cross-over cable or straight-through cable to connect the terminal

device to the network device.

The cable connection of RJ-45 connector conforms to the 568B standard (1-orange white, 2-orange,

3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).

4.5 Connecting PoE Port

You can directly connect the Switch PoE Ethernet port to the device PoE Ethernet port through

network cable to achieve synchronized network connection and power supply. With Extend Mode

disabled, the maximum distance between the switch and the device is about 100 m.

When connecting to a non-PoE device, the device needs to be used with an isolated power supply.

Figure 4-4 Ethernet port pin number

Figure 4-5 Pin description