Dahua 42212TNI Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Digital Camera Dahua 42212TNI. Dahua 42212TNI 20 pages. Network mini ptz camera

Print Page

4 Device Installation

This section details installing the camera to a solid wall or to a ceiling, in an outdoor or an indoor

environment. Note that the wall or ceiling must be capable of supporting a minimum of eight (8) times

the weight of the camera and a bracket (if used).

DO NOT connect the camera to the power supply during installation.

Figure 4-1

Warning: DO NOT connect the camera to the power supply during installation.

Warning: For units intended to be installed outdoors: All wiring connecting to the unit must be routed

separately inside a different permanently earthed metal conduits (not supplied).

Warning: Install external interconnecting cables in accordance to NEC, ANSI/NFPA70 (for US

application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in

accordance to local country codes for all other countries. Branch circuit protection incorporating a

20 A, 2-pole Listed Circuit Breaker or Branch Rated Fuses are required as part of the building

installation. A readily accessible 2-pole disconnect device with a contact separation of at least 3 mm

must be incorporated.

Note: Dahua recommends attaching a "drip loop" (flex or hard conduit) during installation to ensure

condensation does not form in the mount or the conduit.

Note: 24 VAC Class 2 power supply only.