Doyon Artisan Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Oven Doyon Artisan. Doyon Artisan 18 pages.

Print Page

4.1 OPeratIOn Of COntrOL PaneL 9080

The control panel will automatically carry out a series of ac-

tions which ease the baking process. The actions that you

would have to carry out throughout a baking cycle, namely

start the timer, inject steam, change the baking temperature,

are done automatically and you only needs to press the cycle

button on the control panel.

SETTING THE TEMPERATURE

Press the TOP or STONE button to access temperature selec-

tion for TOP and STONE. The correspondent display and but-

ton will flash. Use the

TEMP

desired value and validate by pressing the corresponding

flashing button (TOP or STONE).

SETTING THE ELECTRIC POWER FOR FRONT-TOP

AND FRONT-STONE

Lightly press the

button to select the electric power

for FRONT-TOP and FRONT-STONE. The value for FRONT-TOP

electric power is seen on the TOP display in % over the TOP

electric power. To validate press the

the value for FRONT-STONE is seen on the STONE display in %

over the STONE value.

SETTING THE BAKING TIME

Lightly press the

button to select the desired baking

time in minutes. The clock button and display will flash. Fol-

lowing, set the time and confirm by pressing the

again.

STEAM INJECTION

button for 2-3 seconds to have steam

Press the

injection.

STEAM READY

button. When the steam button

means that it is not possible to inject steam as the

temperature is still below the required value.

As soon as the button stops flashing, the steam injection

sys-tem is ready to inject steam and the baking cycle can

start.

END OF BAKING WARNING MESSAGE

You can program the duration of the "end of baking" warn-

ing message in seconds. Press the

onds and the pilot light and superior display will flash. The

display will show the actual duration of the warning mes-

sage. Define the desired duration and save by pressing the

button again.

and

buttons to select the

TEMP

button. Following,

button

is flashing it

button for two sec-

When the baking cycle starts, the timer will show the remain-

ing time until 0 is reached. An acoustic signal indicating the

end of the baking cycle will be heard. This signal is activated

intermittently by the relay and is on for the pre-set period of

time. Press any button to cancel the warning.

If the baking cycle is not stopped when the baking time is over,

the timer will continue to add time and the oven will continue

baking.The clock will be intermittent to alert you to this situa-

tion. In the following 2nd, 4th, 6th, 8th and 10th minutes the

control panel will activate a brief intermittent warning sound.

In the 10th minute the control panel ends the baking cycle

automatically.

4.2 aDDItIOnaL funCtIOnS

OVEN LIGHT

Enables one to turn the oven light on and off.

EXHAUST BUTTON

Enables one to turn the oven exhaust system on and off.

ECONOMISER BUTTON

This control panel has a system that reduces instant con-

sumed electric power (Economiser) and ensures that the in-

stant consumed electric power does not surpass 50% of the

electric power installed in the chamber.

To select the desired ECO value, you must press the

button. This button will be lit while it is activated.

The maximum consumption value in Kw is indicated when-

ever the economiser is activated. It indicates a value which

will not surpass the value set in the control panel with regard

to the total value that you can define.

BUTTON TO HEAT THE STEAM GENERATOR

This button activates the steam generator.

If this function is off the generator is also off and does not

heat steam or enable steam injection to occur. When the

steam generator is activated you will hear an acoustic sound

and the button

lights up.

You may see the actual temperature of the steam generator

by pressing the button

MODULRAM DIGITAL | Edition A - Revision 0

, for two seconds.

Instruction Manual | 8